SV Mini Heat Pump Plumbing Installation
1. Make a cut in the pipe between the pressure side of the 2 speed pump (circulation pump on Lifestyle Milan and Modena) and the SV Mini controllers remote heater.
2. Then run new PVC piping from the pump to the inlet side of the heat pump (be sure to use 50mm pipe for 2 speed pump and 40mm pipe for spas with circulation pump.)
3. Run new PVC pipe from outlet side of heat pump back to inlet side of SV Mini controller’s remote heater.
SV Mini Heat Pump Electrical Installation
Connect heat pump cables to SV Mini control box as detailed in the diagram below.